Corrosion Prevention for Refrigeration, Air Conditioning & Cold Storage

PIC Unknown - Ship-2-Shore Pumps

Corrosion problems in marine refrigeration and air conditioning systems are severe and are not isolated to sea going vessels.  Coastal and marine influenced environments are also subject to the impact of salt water.  Airborne salt and salt spray are insidious.  The thin film of corrosion or oxide film that often acts as a barrier to further corrosion can be destabilized in the presence of saltwater or airborne salt causing pitting corrosion.

Seawater and airborne salt are an efficient electrolyte that encourage galvanic corrosion between dissimilar metals.  Galvanic corrosion occurs in heat exchangers, especially in water-cooled condensers, line valves and instruments such as pressure gauges, and flow meters, which may be made of dissimilar materials.

Ship-2-Shore dielectric anti corrosion films are highly resistant to salt water, salt spray and airborne salt, displace moisture and stick to metal forming an effective and long lasting barrier to prevent rust, corrosion and electrolysis.  They do not attract dust and dirt, nor become gummy, can be applied to damp surfaces and are effective within a wide range of temperature.  Long lasting anti corrosion protection for insulated pipe and wire, electrical connections and components, electronics, control panels, circuit boards, lighting, motors and machinery.

 

Prevent premature failure of refrigeration and air conditioning electrical components, connections, insulated pipe and wire.  Stop electrolysis between dissimilar metals

  • Rust is a never ending battle.  Water gets into everything, even the most robust components and fixtures.  Almost 50% of all electric, electronic and mechanical component failures are caused by corrosion.
  • Corrosion in electric, electronic and mechanical components is insidious and cannot be readily detected.  When corrosion failure occur, it is often dismissed as just a failure and the part or component is replaced.  The most common reason for corrosion-related failure is atmospheric humidity, condensation and environmental contaminants (dust, dirt, salt, etc.).
  • Extend service life.  Improve operating efficiency.  Reduce downtime, service & repair costs.  Save on replacement part costs.  Ship-2-Shore anti-corrosion films shut down electrolysis between dissimilar metals and stop rust and corrosion 100%
  • Corrosion inhibitor/ lubricant for Canadian mining and marine industries since 1960's.  Industry Canada approved.  Navy and Coast Guard proven.

 

"Ship-2-Shore is awesome! ...we use it on just about everything"  Canadian Forces Member, Deck Crew, HMCS Winnipeg

 

Ship-2-Shore Wet Films are made for Industry

  • 40,000v Dielectric, high performance long lasting protection from moisture and corrosive contaminants.  No cracking, chipping or separation.  Can be used on bare metal and to protect exposed metal where paint or other coatings and seals have cracked, chipped, separated or are not present.  Can be applied over paint.  Ship-2-Shore films are penetrant and migrate to base metal.  Resist splash, spray and complete submersion.  Ideal for exposed surfaces, insulated pipe and wire.
  • When applied, Ship-2-Shore films cure to form dynamic and non-hardening, dripless and self-healing coatings.  Often referred to as wet film.  Ship-2-Shore films adhere like a "magnet to steel" to prevent oxygen contacting base metal and shut down rust and corrosion 100%.  Make excellent high pressure lubricant.  Do not attract dust and dirt nor turn "gummy".
  • Corrosion proof and waterproof electronics, circuit boards, lighting, electrical, wire, connectors, switches, motors, machinery, tools and equipment, nuts, bolts, screws, fasteners, hinges, joints, seams, welds, cracks, voids, etc...
  • Shuts down electrolysis between dissimilar metals.  Use Ship-2-Shore on steel, steel alloy, stainless steel, galvanized, aluminum, iron, copper.
  • Environment friendly.  A little goes a long way and lasts.  Ship-2-Shore films are classified non-hazardous, non-flammable and non-toxic.  Approved for food processing, food service, food retail equipment and facilities.

Available in two formulations

Ship-2-Shore PLID  Thin Film ( 40,000v dielectric ) -  Makes an excellent thin, extreme penetrating, all purpose anti-corrosion, anti-seize and high pressure lubricant film.  Ideal for electrical, electronics, circuit boards and mechanical.  Float Coat PLID for difficult to access cofferdam voids, void between double hulls, tanks, rudder void, keel, etc.

Comes in:

  • 180 gram (6oz) aerosol spray (case of 12)  *most popular product
  • 4 litre bottle (1 gal) (case of 4)
  • 20 litre pail (5 gal)
  • 205 litre drum (55 gal)  *Bonus - free freight on orders of 8 drums or more

Apply with aerosol spray, brush, mop, airless paint sprayer or floatation method.  1 litre covers up to 50 sq ft.  Apply to bare metal, over paint or other hard coatings.  Can be applied to damp surfaces.

Ship-2-Shore Industrial Thick Film ( 40,000v dielectric ) -  "thick" heavy duty, anti-corrosion, high pressure lubricant wet film coating.  Ideal for long lasting corrosion protection under difficult, extreme conditions and just about anything else.  Suitable for workboats, barges, ships, anchor chain, wire rope, offshore structures, deck equipment, electrical, vehicle corrosion preventive undercoat, etc.

Comes in:

  • Convenient 150ml (6 oz) bottle with brush cap (case of 10)  *New - very popular!
  • 4 litre bottle (1 gal) (case of 4)
  • 20 litre pail (5 gal)
  • 205 litre drum (55 gal)  *Bonus - free freight on orders of 8 drums or more

Apply with brush, cloth, mop or airless paint sprayer.  1 litre (1 quart) covers up to 50 sq ft.  Apply to bare metal, over paint or other hard coatings.  Can be applied to damp surfaces.

 

"Ultimate in moisture and corrosion protection"

 

I want to..

Get more details & prices

 

100% Satisfaction Guarantee!

Industry Canada Approved

Environment friendly

Made in Canada.  Product ships from Canada and USA