S2S WIRE ROPE

Extend the life of your wire cable using this easy, one-step application. The ultimate wire cable penetrant, lubricant and rust inhibitor. Penetrates to the core and keeps wire cables flexible, lubricated and rust free for years. Even works on cables submerged in salt water!

 

 

Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

S2S AUTOMOTIVE RUST PROOFING

The ultimate rust inhibitor for cars, trucks and trailers. Easy-to-apply with an airless sprayer, brush or roller. Penetrates under existing rust and acts as a descaler. Polar bonds to metal, like a magnet to steel, and creeps into hard to reach areas. Leaves a long lasting protective barrier against salt and corrosion.

 

 

Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

S2S BRIDGE AND STEEL

The ultimate rust inhibitor for bridges and steel structures. Polar bonds to metal, like a magnet to steel. Penetrates beneath the surface to provide long lasting protection.

No sandblasting required

  • Can be applied over existing rust and paint
  • Leaves a long-lasting, dust-resistant thin film
  • Non-hazardous and non-toxic. Safe to apply over fish-bearing streams.

Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

S2S PLID WRAP ANTI-CORROSION TAPE

We infused an industrial tape with our longest lasting rust inhibitor to create the best performing anti-corrosion tape in the market. Unlike the leading competitor, S2S tape is a simple, one step-solution that requires no surface preparation or primer. Simply apply to desired surface, even over existing rust and paint. The infused rust-inhibitor penetrates into pitting corrosion and creates a protective, long-lasting barrier. It has a pliable, waxy finish that conforms to irregular shapes and contours. For inspections, simply cut open tape, close and remold.

 

Available in different widths.                2 Inch                 4 Inch          Custom

S2S ANTI-CORROSION WIPES

Our 5 in 1 Anti-Corrosion wipes are a convenient new way to protect everyday metal surfaces from rust while leaving a clean, polished finish. Great for everyday maintenance of high traffic areas.

  1. Cleans
  2. Inhibits rust
  3. Penetrates beneath the surface
  4. Leave a micro-barrier that is dry to the touch
  5. Dielectric to 40 kV; stops electrolysis

S2S PLID THIN FILM AEROSOL

S2S Multi-Use spray combines a rust inhibitor, penetrant, lubricant and dielectric in one multi-use formula. It acts as a liquid de-scaler and polar bonds to metal to form a long lasting, self-healing, protective barrier from rust.
One application provides a thin coating of 1-4 mils, resulting in excellent penetrant and anti-seize capabilities. Apply it directly to circuit boards and battery terminals to prevent corrosion. S2S is non-toxic, non-hazardous and environmentally friendly.

Available in       6.3 oz Spray Cans       

S2S DI-ELECTRIC

Electronics – Avoid Replacement Parts & Service Costs Corrosion in electronic components is insidious and cannot be readily detected. When corrosion failure occurs, it is often dismissed as just a failure and the part or component is replaced. The most common reasons for corrosion-related failure is atmospheric humidity and environmental contaminants.

Available in      6.3 oz Spray Can       

S2S LIQUID CORROSION CONTROL

A line of products ideal for preventing rust and corrosion on equipment or metal parts during manufacture, seasonal storage, shutdowns, mothballing or export.

 

Available in three thicknesses.

PLID Thin, Industrial or HD

 

All are Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

Contact us today for your personalized consultation.

Contact us