S2S ANCHOR CHAIN

A simple and proven way to protect anchor chains that requires no downtime or sandblasting. For the last 20 years, S2S has been applied to Coast Guard and Navy Ship anchor chains as a one-step solution. It substantially reduces maintenance costs and can triple the life of the anchor chain. S2S polar bonds to metal, like a magnet to steel, and stays on even when submerged in salt water.

 

Available in 3 sizes     12 oz spray can          20L/5Gal Pail         205/55 Gal Drum

S2S VOID AND RUDDER FLOATCOAT

Ideal for protecting void spaces from rust and corrosion. Unlike hard coatings, S2S penetrates beneath the surface and leaves a long lasting, self-healing protective film. The Float Coat application technique eliminates the need to enter into confined spaces. Simply add product, fill with water and drain.

 

 

Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

S2S WIRE ROPE

Extend the life of your wire cable using this easy, one-step application. The ultimate wire cable penetrant, lubricant and rust inhibitor. Penetrates to the core and keeps wire cables flexible, lubricated and rust free for years. Even works on cables submerged in salt water!

 

 

Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

S2S LIQUID CORROSION CONTROL

A line of products ideal for preventing rust and corrosion on equipment or metal parts during manufacture, seasonal storage, shutdowns, mothballing or export.

 

Available in three thicknesses.

PLID Thin, Industrial or HD

 

All are Available in 2 sizes.                   20L/5Gal. Pail.                   205L/55 Gal. Drum

S2S PLID WRAP ANTI-CORROSION TAPE

We infused an industrial tape with our longest lasting rust inhibitor to create the best performing anti-corrosion tape in the market. Unlike the leading competitor, S2S tape is a simple, one step-solution that requires no surface preparation or primer. Simply apply to desired surface, even over existing rust and paint. The infused rust-inhibitor penetrates into pitting corrosion and creates a protective, long-lasting barrier. It has a pliable, waxy finish that conforms to irregular shapes and contours. For inspections, simply cut open tape, close and remold.

 

Available in different widths.                2 Inch                 4 Inch          Custom

S2S ANTI-CORROSION WIPES

Our 5 in 1 Anti-Corrosion wipes are a convenient new way to protect everyday metal surfaces from rust while leaving a clean, polished finish. Great for everyday maintenance of high traffic areas.

  1. Cleans
  2. Inhibits rust
  3. Penetrates beneath the surface
  4. Leave a micro-barrier that is dry to the touch
  5. Dielectric to 40 kV; stops electrolysis

 

S2S PLID THIN FILM AEROSOL

S2S PLID THIN FILM combines a rust inhibitor, penetrant, lubricant and dielectric in one  formula. It acts as a liquid de-scaler and polar bonds to metal to form a long lasting, self-healing, protective barrier from rust.
One application provides a thin coating of 1-4 mils, resulting in excellent penetrant and anti-seize capabilities. Apply it directly to circuit boards and battery terminals to prevent corrosion. S2S is non-toxic, non-hazardous and environmentally friendly.

Available in        6.3 oz Spray Can

S2S DI-ELECTRIC

Electronics – Avoid Replacement Parts & Service Costs Corrosion in electronic components is insidious and cannot be readily detected. When corrosion failure occurs, it is often dismissed as just a failure and the part or component is replaced. The most common reasons for corrosion-related failure is atmospheric humidity and environmental contaminants.

Available in      6.3 oz Spray Can       

Contact us today for your personalized consultation.

Contact us